Making black powder

Discussions of brands, types & loading, including Black Powder.
Blackfire
Posts: 276
Joined: Mon Apr 08, 2024 5:00 am
Location: Edge of Insanity

Making black powder

Post by Blackfire »

Who makes black powder? How?
I am a wolf. I will confront the sheepdog and eat the flock. ~Blackfire 2009~
BayouMan
Posts: 12
Joined: Fri Jun 07, 2024 3:51 pm

Re: Making black powder

Post by BayouMan »

Broken down into steps.
1. Must make Charcoal out of the following wood.
Willow, Alder, Birch, Fir, Oak, Beech, Ash, Pine, Balsa
Use a one gallon new metal paint can and drill a 3/8 hole in top of lid. Place your wood chunks into paint can and place can into an open fire for two hours.
Instead of an open fire I use a charbroil big easy turkey fryer. 😎
After charcoal is made step two is grinding the charcoal to a fine dust.

2. To grind the charcoal use a vintage manual meat grinder with a Crumb grinding attachment and sift the charcoal # 30 mesh
Keep running the charcoal through the sifting screen until all complete.
Store your charcoal in a mason jar

3. Mix the following together in a plastic mixing bowl
potassium nitrate (saltpeter), sulfur and charcoal.
Use chart for correct measurements.

4. Place the green powder in a rotary tumbler with hopper filled 1/4 full of .50cal lead round balls.
Tumble for 72hours.
Do not tumble close to living area.

5. Take the green powder out of tumbler and store in a plastic airtight container. Now it’s time to make pucks.

6. You will need an 8ton or above press and a 30mm Rosin round press mold. Use small plastic container add 7 TBS of green powder and a plastic fork to mix add 70% alcohol and until green powder starts to get slightly damp.
Add green powder inside of the rosin mold and press for 30 seconds. Pucks should be 1/4 in thick. Follow these steps until all green powder is used.

7. Next place pucks in food dehydrator for 24hours.

8.Take pucks and break up into bean size pieces and run through a ceramic burr coffee grinder

9. Separate by using the following mesh size picture will be attached. With everything smaller then what you need can be re-pressed again.

Make sure to use all plastic hardware or rubber mallets.
No metal to metal.
Never store final powder in Masson jars only plastic air tight jars
Blackfire
Posts: 276
Joined: Mon Apr 08, 2024 5:00 am
Location: Edge of Insanity

Re: Making black powder

Post by Blackfire »

Looks like l have more equipment to get.
I am a wolf. I will confront the sheepdog and eat the flock. ~Blackfire 2009~
BayouMan
Posts: 12
Joined: Fri Jun 07, 2024 3:51 pm

Re: Making black powder

Post by BayouMan »

Data to use.
Attachments
31227BCD-CD5C-45D9-B4AB-1F4E5408EFC4.jpeg
31227BCD-CD5C-45D9-B4AB-1F4E5408EFC4.jpeg (191.24 KiB) Viewed 94 times
AF3A4EF3-3958-43A7-A784-8239ACAF1D8C.jpeg
AF3A4EF3-3958-43A7-A784-8239ACAF1D8C.jpeg (34.87 KiB) Viewed 94 times
BayouMan
Posts: 12
Joined: Fri Jun 07, 2024 3:51 pm

Re: Making black powder

Post by BayouMan »

Data.
Attachments
545B3D59-F20B-432B-89C5-2E2D479088D9.jpeg
545B3D59-F20B-432B-89C5-2E2D479088D9.jpeg (202.27 KiB) Viewed 94 times
EB62E3BA-4884-4BB4-968D-DD28F8C6EB73.png
EB62E3BA-4884-4BB4-968D-DD28F8C6EB73.png (12.3 KiB) Viewed 94 times
BayouMan
Posts: 12
Joined: Fri Jun 07, 2024 3:51 pm

Re: Making black powder

Post by BayouMan »

Rosin Press. Puck press
Attachments
783EB0B3-891F-4FFB-9B24-C6A875621E1F.png
783EB0B3-891F-4FFB-9B24-C6A875621E1F.png (947.91 KiB) Viewed 93 times
BayouMan
Posts: 12
Joined: Fri Jun 07, 2024 3:51 pm

Re: Making black powder

Post by BayouMan »

Pan set.
Attachments
F84C8AF1-80EC-4821-8640-041F62A6AF35.jpeg
F84C8AF1-80EC-4821-8640-041F62A6AF35.jpeg (795.01 KiB) Viewed 92 times
BayouMan
Posts: 12
Joined: Fri Jun 07, 2024 3:51 pm

Re: Making black powder

Post by BayouMan »

Grinder
Attachments
CAB9E54F-BA88-4498-BC78-54559441DF7D.jpeg
CAB9E54F-BA88-4498-BC78-54559441DF7D.jpeg (2.65 MiB) Viewed 92 times
BayouMan
Posts: 12
Joined: Fri Jun 07, 2024 3:51 pm

Re: Making black powder

Post by BayouMan »

Charcoal grinder with crumbled attachment.
Attachments
C569971C-E73A-45B3-9E04-72CB2243378E.jpeg
C569971C-E73A-45B3-9E04-72CB2243378E.jpeg (2.65 MiB) Viewed 92 times
71EC0947-E8C5-4F76-97E8-A8BB9FC4BD27.jpeg
71EC0947-E8C5-4F76-97E8-A8BB9FC4BD27.jpeg (2.76 MiB) Viewed 92 times
User avatar
7000grain
Posts: 173
Joined: Fri Feb 23, 2024 6:55 pm
Location: Conowingo, MD

Re: Making black powder

Post by 7000grain »

BayouMan wrote: Thu Jun 20, 2024 12:52 am Broken down into steps.
1. Must make Charcoal out of the following wood.
Willow, Alder, Birch, Fir, Oak, Beech, Ash, Pine, Balsa
Use a one gallon new metal paint can and drill a 3/8 hole in top of lid. Place your wood chunks into paint can and place can into an open fire for two hours.
Instead of an open fire I use a charbroil big easy turkey fryer. 😎
After charcoal is made step two is grinding the charcoal to a fine dust.

2. To grind the charcoal use a vintage manual meat grinder with a Crumb grinding attachment and sift the charcoal # 30 mesh
Keep running the charcoal through the sifting screen until all complete.
Store your charcoal in a mason jar

3. Mix the following together in a plastic mixing bowl
potassium nitrate (saltpeter), sulfur and charcoal.
Use chart for correct measurements.

4. Place the green powder in a rotary tumbler with hopper filled 1/4 full of .50cal lead round balls.
Tumble for 72hours.
Do not tumble close to living area.

5. Take the green powder out of tumbler and store in a plastic airtight container. Now it’s time to make pucks.

6. You will need an 8ton or above press and a 30mm Rosin round press mold. Use small plastic container add 7 TBS of green powder and a plastic fork to mix add 70% alcohol and until green powder starts to get slightly damp.
Add green powder inside of the rosin mold and press for 30 seconds. Pucks should be 1/4 in thick. Follow these steps until all green powder is used.

7. Next place pucks in food dehydrator for 24hours.

8.Take pucks and break up into bean size pieces and run through a ceramic burr coffee grinder

9. Separate by using the following mesh size picture will be attached. With everything smaller then what you need can be re-pressed again.

Make sure to use all plastic hardware or rubber mallets.
No metal to metal.
Never store final powder in Masson jars only plastic air tight jars
Awesome step by step write up Philo. Making my shopping list now. lol.
Eric Adair
Post Reply

Return to “Powders”