Bullet Swaging and Casting for 22 TCM

Theory and discussions of applications.
Post Reply
jeffimperial
Site Admin
Posts: 3
Joined: Fri Aug 30, 2024 2:49 pm

Bullet Swaging and Casting for 22 TCM

Post by jeffimperial »

Been looking for a solution to make my own .224 diameter jacketed bullets for the .22 TCM caliber.

I've seen BT Sniper and Corbin swaging tools, but the entire setup for either makes cost and shipping almost impossible for me. Anyone got any ideas?

I'm most after something like the 22 CAL 40 GR HP Varminter or 22 Cal .224 35 gr V‑MAX (without the polymer tip).

Image
Factory spec 22 TCM
Blackfire
Posts: 709
Joined: Mon Apr 08, 2024 5:00 am
Location: Edge of Insanity

Re: Bullet Swaging and Casting for 22 TCM

Post by Blackfire »

Eric??

Jeff, you have a lube sizer for cast bullets? Casting mould for bullets?
I am a wolf. I will confront the sheepdog and eat the flock. ~Blackfire 2009~
Blackfire
Posts: 709
Joined: Mon Apr 08, 2024 5:00 am
Location: Edge of Insanity

Re: Bullet Swaging and Casting for 22 TCM

Post by Blackfire »

Missed the jacketed part...sorry.
I am a wolf. I will confront the sheepdog and eat the flock. ~Blackfire 2009~
jeffimperial
Site Admin
Posts: 3
Joined: Fri Aug 30, 2024 2:49 pm

Re: Bullet Swaging and Casting for 22 TCM

Post by jeffimperial »

Yep, I should also have said that these solutions are for swaging .22LR casing, pressure forming a lead core into it, and shaping the nose.
Post Reply

Return to “Bullet Casting”