Entry level

[Blackfire]

It does help. I will have a press light setup for you.
You may want to look into a sturdier bench than collapsible tables...even one 2'x3' is big enough...

[Blackfire]

David, here is what l have come up with do far...


Press brand(s): RCBS JR2
Hand press: Lee
Hand primer: Lee Vintage (F)
Trickler: Lyman
Scale brand : RCBS 505
Powder throw : RCBS w/2 cylinders
Powder stand: RCBS
Kinetic hammer: Blue
Tumbler:
Tumbler media:
Caliper: Pittsburg digital
Case Trimmer: x
Swager: x
Primer trays: Dillon metal
Debur/chamfer:  hand 6-in-1
Reloading manual: Lyman 51 soft cover
Dies brand / shell holder:
RCBS 3-piece carbide w/Lee FCD
Lee 9mm 4-piece carbide
Universal Decapper: Lee decapper

More to follow.

[Papifunko]

Doing incredible work brother. I'm really looking forward to getting lost in this!

[Blackfire]

Lost yet?

[Oilwell99]

Ok so like blackfire said brands are like trucks I use rcbs but that what I started with and yes single stage is also what I enjoy alot also and and YouTube is a good resource as well as asking here also and the biggest thing to remember is if you dont like it tear it apart and redo it